
Descriptions:
Mirrored image by defaut as a rear view camera, by cutting up the switch cable you get non-mirrored image to use as a front or side camera.
Guideline is On by defaut as a rear view camera, by cutting up the switch cable the guideline will be removed.
4.3" IPS display LCD screen monitor, small and exquisite appearance.
With AV input, it can connect with reversing camera, DVD, VCD etc.
Number plate Reversing/Reverse Camera, universal for most of vehicles like Car, SUV, Truck or Van.
Rear Park backup camera through the 120° wide-angle camera device, the obstacle behind the car is clearly visible.
Can be connected with your existing OEM or aftermarket LCD/TFT displays that use a standard RCA input connection.
IP68 waterproof design, this rear view camera designed with fully sealed glue filling craft, adapting to all climates. So you absolutely no need to worry about the damage caused by rain, snow or car wash in daily use.
Monitor Specifications
Screen size: 4.3 inch IPS display
Display format:16: 9
Contrast: 300: 1
Brightness: 300 CD/㎡
Video: 2-channel video input; V1/V2 switching
Resolution: 480 (H) x 272 (V)
Power supply: DC 12V
Rear view in priority
Blue screen on no signal
Video system: NTSC / PAL auto switch
Current consumption: <4W
Operation temperature: -20℃ ~ 60℃
Storage temperature: -20℃ ~ 60℃
Note: The screen will bright only when connected to the signal source
Camera Specifications
- Image sensor: 1/4 "CMOS
- TV system: PAL/NTSC
- waterproof rating: IP68
- Lens Angel: Imaging angle 120°, horizontal angle 100°
- Effective pixel: 733H*493V
- Horizontal sync frequency: 15.625KHZ
- Vertical sync frequency: NTSC 60HZ
- Scanning system: 2:1 interface
- Sync system: Internal
- ACG: Auto
- BLC: Auto
- Resolution: 480 TV Lines
- S/N Ratio: More than 48dB
- Current consumption: no more than 150mA
- Minimum illumination: 0.1 - 0.5Lux / F = 1.2
- Power supply: DC12V
- Power: 5W
- Operating temperature:-20°~70°C